Table of Contents
Advertisement
Exploded View/Disassembly&Assembly Instructions
1) SCREW the 2POINTs.
5
2) Cover the SCREW CAPs.
3) Attach the protective Tape at the Hinge part.
1) Screwdriver torque : 1.3 ± 0.05 Kgf.cm
1) Place the Keypad like below.
7
1) Be careful of assembly holl.
This Document can not be used without Samsung's authorization
SAMSUNG Proprietary-Contents may change without notice
1) In the first place, insert the LCD con. and
6
then push the Hinge when combining Folder &Front.
2) Attach the TAPE like below
1) Be careful not to get a damage of LCD CONNECTOR
FPCB.
1) Insert the PBA under Hooker.
8
2) Place the VOL KEY FPCB and CAM KEY FPCB
3) Combine the LCD CONNECTOR with accuracy.
①
②
1) Be careful not to get a damage of Hooker.( It's
very weak)
5-8
②
Advertisement
Table of Contents
