Listening to Radio
You can listen to the chosen band (FM broadcast stations) by using either the
automatic or manual tuning operation.
Remote Control Unit
1
2
Press TUNER
Tune in to the
button.
desired station.
Automatic Tuning 1
press
TUNING
the preset station.
Automatic Tuning 2
TUNING
search the band.
Manual Tuning
TUNING
higher frequency.
Main Unit
Press the FUNC.
1
2
Select a broadcast
button to select the
station.
FM band.
Automatic Tuning 1
press
station.
Automatic Tuning 2
band.
Manual Tuning
press
higher frequency.
Press MO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
•
Each time the button is pressed, the sound switches between "STEREO" and "MONO".
•
In a poor reception area, select MONO for a clear, interference-free broadcast.
41
Press the STOP ( ) button
to select PRESET and then
button to select
or
Press the STOP ( ) button to
select "AUTO" and then press
button to automatically
or
Press STOP ( ) to select
MANUAL and then briefly press
to tune in to a lower or
or
Press the STOP ( ) button
to select PRESET and then
button to select the preset
Press the STOP ( ) button to
select "AUTO" and then press
button to automatically search the
Press STOP ( ) to select
MANUAL and then briefly
to tune in to a lower or
Presetting Stations
You can store up to:
15 FM stations
Example: Presetting FM 89.1 in the memory
1
2
Press TUNING
Press the TUNER
button and select
the FM band.
"89.10".
•
Refer to Step 2 on page 41
to automatically or manually
tune in to a station.
kHz
4
5
Press TUNING
Press the TUNER
or
to select
MEMORY button.
preset number.
•
•
You can select between 1 and
If you can't press "TUNER MEMORY" in 5
15.
seconds, the preset disappears and "FM"
displays.
MO
kHz
3
Press the TUNER
or
to select
MEMORY button.
kHz
6
To preset another
station, repeat
steps 2 to 5.
MO
kHz
ENG
kHz
42