Resetting The Picture Settings To The Factory Defaults - Samsung LE32A676A1M User Manual

Digital NR: Off/Low/Medium/High/Auto

If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help
reduce any static and ghosting that may appear on the screen.
When the signal is weak, select one of the other options until the best picture is displayed.
➣
DNIe: Off/Demo/On

This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to on, you can view the screen
with the DNIe feature activated. If you set the DNIe to Demo, you can view the applied DNIe and normal pictures on
the screen, for demonstration purposes. Using this function, you can view the difference in the visual quality.
DNIe™ (Digital Natural Image engine) DNIe™
➣
This feature brings you more detailed image with 3D noise reduction, detail enhancement, contrast enhancement
and white enhancement. New image compensation Algorithm gives brighter, clearer, more detailed image to you.
DNIe™ technology will fit every signal into your eyes.
This function is not available in "Movie" and "Standard" mode.
➣
HDMI Black Level: Normal/Low

You can directly select the black level on the screen to adjust the screen depth.
This function is active only when the external input connects to HDMI (RGB signals).
➣
Movie Plus: Off/Low/Medium/High/Demo (LEA)

You can view more natural skin and clear text even in fast moving scenes.
Use this function when watching movies.
➣
This function is not available in "Wide Zoom" and "Zoom" modes.
➣
This function is not available when "PIP" is set to "On".
➣
It is not supported in HDMI 1080p/24Hz, 25Hz, 30Hz mode.
➣
00Hz Motion Plus: Off/Low/Medium/High/Demo (LEA, LE0A, LEA, LEA)

Removes drag from fast scenes with a lot of movement to provide a clearer picture.
This function is not available in PC mode.
➣
If you enable "100 Hz Motion Plus", noise may appear on the screen. If this occurs, set "100Hz Motion Plus" to "off"
➣
or select one of the other options.
Blue Only Mode: Off/On

This function is for AV device measurement experts. This function displays the blue signal only by removing the red
and green signals from the video signal so as to provide a Blue Filter effect that is used to adjust the Colour and Tint of
video equipment such as DVD players, Home Theaters, etc.
Using this function, you can adjust the Colour and Tint to preferred values appropriate to the signal level of each video
device using the Red/Green/Blue/ Cyan/Magenta/Yellow Colour Bar Patterns, without using an additional Blue Filter.
"Blue Only Mode" is available when the picture mode is set to "Movie" or "Standard".
➣

Resetting the Picture Settings to the Factory Defaults

1.
To select the desired picture mode, follow the "Changing the Picture
Standard" instructions numbers 1 and 2. (see page 25)
2.
Press the ▲ or ▼ button to select "Picture Reset", then press the
ENTER button.
3.
Press the ▲ or ▼ button to select "OK" or "Cancel", then press the
ENTER button.
Press the EXIT button to exit.
Each mode can be reset.
➣
English - 
Detailed Settings
Picture Options
Picture Reset
OK
Cancel
►