Placing The Television In Standby Mode - Samsung CS21Z30 Owner's Instructions Manual

Remote Control
(depending on the model)
➢
Operation of remote control may be affected by bright
artificial light near to the TV.
➢
This is a special remote control for the visually impaired,
and has Braille points on the POWER, Channel and
Volume buttons.
1 POWER 3 -/--
Used to switch the TV Used to select a
on and off. channel numbered
ten or over. Press this
2 Numeric buttons
button, then "--" symbol
Used to select channels
is displayed. Enter
directly.
the two-digit channel
number.
/ # P
4
Used to increase or Used to display the
decrease the volume. next or previous stored
channel.
5 MENU
Used to display the
$ EXIT
on-screen menu or Used to exit from any
return to the previous display or return to
menu. normal viewing.
6 ▲/▼/◄/► % MUTE
Used to control the Used to switch the
cursor in the menu. sound off temporarily.
To turn the sound back
7 S.MENU (option)
on, press the MUTE,
Used to display the
sound menu.
^ ENTER
8 TURBO (option)
While using the
Used to select the turbo
on-screen menus, press
sound option.
the ENTER button to
9 DUAL I-II (option)
activate (or change) a
Used to select the
particular item.
sound mode.
& S.MODE (option)
0 SOURCE
Used to select the
Used to display all of
sound effect.
the available video
* P.MODE
sources.
Used to select the
! INFO
picture effect.
Used to view the
( TV
channel information
Used to return to the
and setting status you
TV mode when it is in
selected.
external input mode.
@ PRE-CH
) SLEEP
Used to switch
Used to select a
repeatedly between
preset time interval for
the last two channels
automatic turn off.
displayed.
Installing Batteries
Remove the cover. Install two AAA size
batteries, then replace the cover.
When the remote control does not operate
normally, check that the "+" and "–" ends of
the batteries are inserted correctly or the
batteries are drained.
➢
Do not mix battery types, i.e. alkaline and manganese.
English - 2
Switching the Television On and Off
The mains lead is attached to the rear of the television
/ P
1 Plug the mains lead into an appropriate socket.
➢
The main voltage is indicated on the rear of the
television and the frequency is 50 or 60Hz.
2 Press the " I " button (On/Off) on the front (or side) of the
television.
3 Press the POWER button on the remote control to switch
the television on. The programme that you were watching
last is re-selected automatically. If you have not yet stored
2 2
any channels, no clear picture appears. Refer to "Channel
1 1
- Auto Store" on page 3 or "Channel - Manual Store" on
page 4.
, or button.
➢
If the television is initially powered on, several basic
customer settings proceed automatically.
Refer to "Setup - Plug & Play" on page 3.
4 To switch the television off, press the " I " button (On/Off)
on the front (or side) of the television.

Placing the Television in Standby Mode

The television can be placed in standby mode, in order to
reduce power consumption and wear of the cathode ray
tube. Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
1 Press the POWER button on the remote control while
viewing.
The television is in standby mode.
2 To switch the television back on, simply press it again.
➢
You can also switch on by pressing the TV,
P
☛
Do not leave the television in standby mode for long
periods of time (when you are away on holiday, for
example). Turn the television off by pressing the " I "
button (On/Off) on the front (or side) of the television. It is
best to unplug the set from the mains and aerial.
/ P , or numeric button.