Viewing The Menus - Samsung CS21Z30 Owner's Instructions Manual

Viewing the Menus

1 Press the MENU button.
The main menu is displayed on the screen. Its left side
has five icons: Input, Picture, Sound, Channel, and
Setup.
2 Press the ▲ or ▼ button to select one of the icons.
Press the ENTER button to access the icon's sub-menu.
3 Press the ▲ or ▼ button to move to items in the menu.
Press the ENTER button to enter items in the menu.
4 Press the ▲/▼/◄/► button to change the selected items.
Press the MENU button to return to the previous menu.
5 Press the EXIT button to exit from the menu.
Setup - Plug & Play
(depending on the model)
When the television is initially powered on, several basic
customer settings proceed automatically and subsequently.
The following settings are available.
1 If the television is in standby
mode, press the POWER
Start Plug & Play.
button on the remote control.
The message Start Plug &
Play. is displayed.
To start Plug & Play, press the
ENTER button.
Language
The Language menu is
English
displayed.
Français
➢
The Language menu will Indonesia
Melayu
automatically appear after
several seconds, even if
Türkçe
the ENTER button is not
Move
pressed.
2 Select the appropriated
language by pressing the
Check antenna input.
▲ or ▼ button. Press the
ENTER button.
The Check antenna input. is
displayed.
➢
If any language is not selected, the language menu
will disappear about 30 seconds later.
3 To search the channels,
press the ENTER button.
To stop the search, press the
ENTER button.
When the channel searching
has finished, the Clock Set
menu is displayed.
4 Press the ◄ or ► button to
move to the hour or minute.
Set the hour or minute by
pressing the ▲ or ▼ button.
5 When you have finished,
press the MENU button.
The Enjoy your watching.
is displayed, and then the
channel which has been
stored will be activated.
Re-setting the Plug & Play
Method:
MENU  ▲/▼ (Setup) 
ENTER  ▲/▼ (Plug & Play)
Plug & Play
 ENTER
OK
Enter Return
Plug & Play
Enter Skip
Plug & Play
OK
Enter Skip
continued...
Plug & Play
Auto Store
Start
Enter Skip
Plug & Play
Auto Store
P 1 102MHz
7 %
Stop
Enter Skip
Plug & Play
Clock Set 1 2 : 0 0 a m
Move Enter
Adjust Skip
Enjoy your watching.
OK
TV Setup
Plug & Play ►
Language : English ►
Time ►
Child Lock ►
Blue Screen : Off ►
Move Enter Return
English - 3
Input - Source List
(depending on the model)
You can switch between viewing
TV
signal from connected equipment,
TV
AV
such as a VCR, DVD, set-top box,
Component
and the TV source (broadcast or
cable).
➢
You can change the required
Move
external source simply by
pressing the SOURCE button
on the remote control. It might take a short period of time
for pictures to be switched. To return to the TV mode,
press the TV button on the remote control.
Channel - Auto Store
You can scan for the frequency ranges available to you (and
availability depends on your country). Automatically allocated
programme numbers may not correspond to actual or desired
programme numbers. However you can sort numbers
manually and clear any channels you do not wish to watch.
Channels are sorted and stored
in the order which reflects their P 1
position in the frequency range
(with lowest first and highest
last). The programme originally
Enter
selected is then displayed.
➢
To stop the search before it has finished, press the ENTER
button.
When finished, the Sort menu is displayed. To sort the stored
channels into the desired numerical order, refer to "Channel -
Sort" on page 4.
To exit without sorting, press the EXIT button.
Source List
Enter Return
Search
102MHz
7 %
Stop
Return