Table of Contents
Advertisement
Search for and connect to a WLAN
1. In Menu mode, select Wi-Fi → Search.
2. Select a network icon → Add and add a
connection profile.
• If the network you want needs an IP address,
subnet mask, DNS, or gateway information,
select Advanced settings.
• The WLAN security should be set as the
selected network configuration.
3. In Menu mode, select Internet or Communities,
or in Idle mode, select a web-based widget.
4. Select and drag a network icon into the centre (if
necessary).
Your phone connects to the network using the
connected WLAN profile.
To access the internet via another method,
change the connection profile to the desired
method.
To connect to a WLAN using a WPS (Wi-Fi
Protected Setup) access point,
1. In Menu mode, select Wi-Fi → Search.
2. Select a WPS icon (
3. Select WPS push button or WPS enter PIN
depending on the AP device type.
4. Select Start and press a WPS button on the AP
device within 2 minutes.
Or, enter a PIN on the AP device and select Start
within 2 minutes.
) and select Add.
53
Advertisement
Table of Contents
