Table of Contents
Advertisement
7. SGH-X461 Exploded and assembling View
7-1. Disassembly
1
1)
Loosen the screw of
4 point.
1.
Be care of scratch and molding damage.
4
1) Push the hinge and disjoint from Front.
1) When we disjoint the Front, be care of body transformation.
2
1) It uses assembly stick and the HOOK
of the right side lower part confidential
talk it disjoints with the outer side which
it will call.
2) The HOOK gets wider and it catches it
lifts it disjoints with REAR by the hand.
1.
When we disjoint Rear, be care of scratch and molding damage.
5
1) Remove a screw cap by using a pinset.
2) Loosen a screw by using a driver.
1) Be care of scratch.
7-1
SAMSUNG Proprietary-Contents may change Without notice
This Document can not be used without Samsung's authorization
1) After connector we disjointing PBA.
3
2) Remove the foreign object
projection Tape.
3) Remove the Key Pad by using a
pinset.
When we disjointing a connector and PBA, be care of damage.
6
1) By using a assembly stick we disjoint between
Folder Upper and lower (it's same process right and
left)
1) Be care of scratch and molding damage.
Advertisement
Table of Contents
