Samsung SGH-M600S Service Manual page 10

2-3. Assembly
1
1) Remove RF cover using the pointed tool.
2) Disjoint the REAR Screw of 5 Points.
※ caution
1) Be careful for scratch
3
1) Disjoint volume-key & pwr-key.
2) Remove the green tape on the connector
of key-pad FPCB.
※ caution
1) Be careful for crumpling & crack of key-pad
FPCB.
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
2
<pic 1>
1) Disjoint REAR's lockers just like pictures
below.(pic1 & pic 2)
2) Disjoint other lockers too.
※ caution
1) Be careful for scratch
2) Be careful for demage of lockers.
4
1) Disjoint the intenna screw of 2 points.
2) Disjoint the key-pad FPCB from connector.
3) Take off the motor from the FRONT plastic
using tweezers and disjoint pwr-key FPCB &
volume key FPCB from the FRONT plastic.
※ caution
1) Be careful for scratch.
2) Be careful for the damage on the WIRE of
Motor
2-4
Main Electrical Parts List
<pic2>