Samsung Galaxy GT-P1000L User Manual page 88

Install mobile devices and equipment with caution
•
Ensure that any mobile devices or related equipment installed in your vehicle are securely
mounted.
•
Avoid placing your device and accessories near or in an air bag deployment area.
Improperly installed wireless equipment can cause serious injury when air bags inflate
rapidly.
Allow only qualified personnel to service your device
Allowing unqualified personnel to service your device may result in damage to your device
and will void your manufacturer's warranty.
Handle SIM cards or memory cards with care
•
Do not remove a card while the device is transferring or accessing information, as this could
result in loss of data and/or damage to the card or device.
•
Protect cards from strong shocks, static electricity, and electrical noise from other devices.
•
Do not touch gold-colored contacts or terminals with your fingers or metal objects. If dirty,
wipe the card with a soft cloth.
Ensure access to emergency services
Emergency calls from your device may not be possible in some areas or circumstances. Before
traveling in remote or undeveloped areas, plan an alternate method of contacting emergency
services personnel.
Be sure to back up important data
Samsung is not responsible for data loss.
Do not distribute copyright-protected material
Do not distribute copyright-protected material that you have recorded to others without the
permission of the content owners. Doing this may violate copyright laws. The manufacturer is
not liable for any legal issues caused by the user's illegal use of copyrighted material.
Specific Absorption Rate (SAR) certification information
Your device conforms to U.S. Federal Communications Commission (FCC) standards that limit
human exposure to radio frequency (RF) energy emitted by radio and telecommunications
equipment. These standards prevent the sale of mobile device that exceed a maximum
exposure level (known as the Specific Absorption Rate, or SAR) of 1.6 W/kg.
During testing, the maximum SAR values recorded for this model were:
Network Frequency
GSM850
GSM1900
WCDMA850
WCDMA1900
GSM900
GSM1800
WCDMA2100
In normal use, the actual SAR is likely to be much lower, as the device has been designed
to emit only the RF energy necessary to transmit a signal to the nearest base station. By
automatically emitting lower levels when possible, your device reduces your overall exposure
to RF energy.
The FCC has granted an Equipment Authorization for this model device based on the
compliance of all reported SAR levels with the FCC RF exposure guidelines. The authorization
can be found on the FCC Office of Engineering and Technology website at
www.fcc.gov/oet/ea (search for grantee code A3L and product code GTP1000L).
When carrying the product or using it while worn on the body maintain a distance of
5 mm from the body to ensure compliance with RF exposure requirements.
Specific Absorption Rate (W/kg)
1.03
0.64
0.77
0.97
0.71
0.69
0.967
87
Safety precautions