Samsung GT-P7320 User Manual page 82

›
Add a Wi-Fi AP manually
1
Open the application list and select
and networks
2
Enter the SSID for the network and select the security
type.
3
Set the security settings depending on the selected
security type.
4
Save.
Select
›
Connect to a Wi-Fi AP using a Wi-Fi Protected
Setup (WPS)
Using WPS, you can connect to a secured network.
To connect to a Wi-Fi AP with a WPS button,
1
Open the application list and select
and networks
2
Select a network indicated as WPS available and select the
drop-down menu next to Network Setup.
3
WPS push button
Select
4
Press a WPS button on the access point within 2 minutes.
To connect to a Wi-Fi AP with a WPS PIN,
1
Open the application list and select
and networks
2
Select a network indicated as WPS available and select the
drop-down menu next to Network Setup.
3
WPS pin from access point or WPS pin from this
Select
device
→
4
On the access point, enter the PIN and press the start
button.
Wi-Fi settings
→
Wi-Fi settings.
→
→ Wi-Fi settings.
OK.
Settings
Add Wi-Fi network.
→
Settings
→ OK.
Settings
Connectivity
82
→ Wireless
→ Wireless
→ Wireless