Samsung Galaxy S GT-I9001 User Manual page 15

4
When the battery is fully charged (the battery icon is
no longer moving), unplug the travel adapter from the
device and then from the power outlet.
Do not remove the battery before removing the
travel adapter. Doing this may cause damage to the
device.
To save energy, unplug the travel adapter when not
in use. The travel adapter does not have a power
switch, so you must unplug the travel adapter from
the outlet to interrupt the power supply. The travel
adapter should remain close to the socket when
in use.
14
Assembling
›
Charge with the PC data cable
Before charging, ensure that your PC is turned on.
1
Open the cover of the multifunction jack.
2
Plug one end (micro-USB) of the PC data cable into the
multifunction jack.
3
Plug the other end of the PC data cable into a USB port
on a PC.
Depending on the type of PC data cable you are
using, it may take some time before charging
begins.
4
When the battery is fully charged (the battery icon is
no longer moving), unplug the PC data cable from the
device and then from the PC.