Samsung SGH-F700V Service Manual page 103

1) SLIDE UP SLIGHTLY.
5
2) DRIVE SCREWS AT 2 POINT.
1) PLEASE MAKE SURE THAT THE F-PCB IS LOCATED IN THE
MIDDLE OF SLOT.(OTHERWISE F-PCB WILL BE DAMAGED.)
1) DRIVE SCREWS AT 4 POINT.
7
1) WHEN YOU ASSEMBLE,BE CAREFUL NOT TO DESTROY THE
SHIELD GASKET.
2) USE AN AIR GUN NOT TO LEAVE ANY PARTICLE ON LCD
CONNECTOR.
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Disassembly and Assembly Instructions
1) ATTACH CONDUCTION GASKET.
6
2) INSERT CORRECTLY KEY PAD.
1) ATTACH MAIN PBA.
8
1. AT FIRST, ATTACH MAIN CAMERA.
2. TURN 180°THE EARJACK THEN INSERT IT.
2) ASSEMBLE KEY CONNECTOR.
3) DRIVE SCREWS AT 1 POINT.
1) WHEN LCD CONNECTOR IS ASSEMBLED, CHECK IT OUT
THERE IS "TICK' SOUND.
2) WHEN YOU DRIVE SCREWS, TAKE CARE NOT TO TOUCH THE
COMPONENTS.
11-5