Disassembly and Assembly instructions
13
1) Put the FPCB of LCD and CAMERA between
INTEANNA and PBA.
2) Snap the connector of LCD and CAMERA.
※ caution
1) Be careful not to damage or tear FPCB.
2) When snapping, confirm the click sound.
15
1) Screw 6 points like a picture below.
※ caution
1) Be careful not to damage or scratch the
molding.
This Document can not be used without Samsung's authorization
②
①
SAMSUNG Proprietary-Contents may change without notice
14
1) Screw INTENNA.
※ caution
1) Be careful not to damage or scratch
INTENNA.
16
1) Insert 2 screw covers in the top.
6-8