Step 2: Setting Up The Tv; Selecting The Colour System That Corresponds To Your Tv - Philips DVD737 User Manual

Getting Started
Step 2: Setting up the TV
IMPORTANT!
Make sure you have completed all
the necessary connections. (See
pages 8-9 "Connecting TV").
1
Turn on the TV and set to the correct
video-in channel. You should see the blue
Philips DVD background screen on the
TV.
2
Usually these channels are between the
lowest and highest channels and may be
called FRONT, A/V IN, or VIDEO. See your
TV manual for more details.
Or, you may go to channel 1 on your
TV, then press the Channel down button
repeatedly until you see the Video In
channel.
Or, the TV Remote Control may have a
button or switch that chooses different
video modes.
Or, set the TV to channel 3 or 4 if you
are using an RF modulator.
3
If you are using external equipment, (eg.
audio system or receiver), turn it on and
select the appropriate input source for
the DVD Player output. Refer to the
equipment owner's manual for detail.
14
Selecting the colour system that
corresponds to your TV
This DVD Player is compatible with both
NTSC and PAL. In order for a DVD disc
to play on this Player, the colour system of
the Disc, the TV and the DVD Player
should match.
1
Stop playback and press SYSTEM MENU.
2
Press 4 3 to select 'Video Setup' page.
3
Enter its submenu by pressing OK.
4
Use the 1 2 3 4 keys on the Remote
Control to navigate in the menu.
Move to 'TV Type' and press 2.
PAL – Select this if the connected TV is
PAL system. It will change the video signal
of a NTSC disc and output in PAL format.
NTSC – Select this if the connected TV
is NTSC system. It will change the video
signal of a PAL disc (VCD only) and
output in NTSC format.
Multi – Select this if the connected TV is
compatible with both NTSC and PAL
(multi-system). The output format will be
in accordance with the video signal of the
disc.
5
Select an item and press OK.
6
Press 1 to return to 'Video Setup' page.
To remove the menu
Press SYSTEM MENU.