Table of Contents
Advertisement
5
1) Remove the green insulating tape on the
connector of KEY PBA.
2) Remove the green insulating tape on the
connector of SPK and MOTOR.
※ caution
1) Be careful not to damage CONNECTOR.
7
1) Disassemble CAMERA KEY FPCB.
2) Disassemble VOLUME KEY FPCB..
※ caution
1) Be careful not to damage FPCB.
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
6
1) Pull out KEY PBA FPCB from the connector.
2) Pull out SPK and MOTOR FPCB from the
connector.
※ caution
1) Be careful not to damage CONNECTOR.
8
1) Disjoint HOOK holding MAIN PBA, and detach
MAIN PBA from SET.
※ caution
1) Be careful not to damage SLIDE FPCB.
7-2
Exploded View and Parts List
Advertisement
Table of Contents
