Table of Contents
Advertisement
4.3 SETTINGS
Press Start
• USER
Press Up
• GENERAL
60
ADJUSTING SETTINGS, REVIEWING FILES AND USING TIMERS (TIME MAIN MODE)
The Settings menus allow you to manually enter memory, user, and wrist unit settings. You can
also prepare your settings with the Polar UpLink Tool and transfer them to your wrist unit from
your PC. For further information, see page 75.
Note: You are not able to enter the Settings menu when you are using Action recording.
4.3.1 SETTING USER INFORMATION
Entering your personal information ensures that your calorie counter and Fitness Test will
operate with the highest possible degree of accuracy.
1. In the Time main mode, press the Start button. Menu WATCH SET is displayed.
2. Press the Up
or Down
3. Press the Start button. Settings USER is displayed.
4. Press the Start button to specify the user information settings and follow the steps below:
The display reads:
5. Weight
SET KILOGRAM or POUNDS
Note:
• The units of weight and height depend on your choice in the units settings. If you chose the wrong units,
you can still change them by pressing and holding the Light button.
• To change your settings, press the Stop button and return to step 4.
button until Menu SETTINGS is displayed.
Press Up
or Down
to set the flashing value
Up
/ Down
button
Press the Start
button to accept
Start
Advertisement
Table of Contents
