Features; How To Use This Manual - Mackie SP260 Owner's Manual

Features

• Professional 2-input, 6-output system processor
for passive and powered PAs
• Sophisticated, intuitive EQ, crossover, delay
and dynamics processing optimizes and protects
your system
• High-end 24-bit AKM
dynamic range
• Two balanced XLR inputs with level control, mute,
600ms delay and 5-band parametric / shelving EQ
• Six balanced XLR outputs with level control,
mute, polarity invert, dedicated high and low
pass filters, 7-band parametric / shelving EQ,
600ms delay, and limiting
• Powerful limiter on every output for
ultimate protection
• Convenient front-panel controls for parameter
editing and input / output muting
• USB port for simple programming via PC
• Linkable inputs and outputs for easy
stereo configuration
• 7-segment LED metering for input / output level
or limiter activity
• 5 operating modes: 2 x stereo + sub, 3 x stereo,
2 x 2-way + sub, 2 x 3-way and 1 x 6-way
• 24 presets for storing your Mackie or other
system parameters
• Switchmode power supply: 100V – 240V
• Compact, single rack unit design
4
SP260 2x6 Speaker Processor
® AD/DA with 120 dB

How to Use This Manual:

After this introduction, a getting started guide will
help you get things set up fast. The hook-up diagrams
show some typical setups, while the remaining sections
provide details of the SP260 and how to use it to
optimize your PA system.
This icon marks information that is critically
important or unique to the processor. For your
own good, read and remember them.
This icon leads you to in-depth explanations
of features and practical tips. They usually
have some valuable nuggets of information.
This icon draws attention to certain features
and functions relating to the usage of the
processor.