Guidance Mode - Acura 2011 RDX Navigation System Navigation Manual

System Setup
The diagram below shows how the
system handles the search for "Places
Along the Route" or "Places Around the
Destination" (see Search Waypoint on
page 74).
108 Navigation System
For "Places Along the Route," the
system looks in front of you within a
corridor width specified by your values
for "On Freeways" or "On Surface
Street." The system checks the
upcoming area, based on your input.
For "Places Around the Destination,"
the system searches outwards in a spiral
from the destination. In this case,
specific search values are not needed;
the matches are displayed in order of
distance from destination.
NOTE:
These settings do not affect the search
range used for the voice commands like
"Find nearest gas station" that are also
available when viewing the map screen.

Guidance Mode

Allows you to select the guidance
display mode: Single Screen or Split
Screen.
To get to Guidance Mode from the
SETUP screen, select in sequence,
"Other" tab, "Routing & Guidance,"
and "Guidance Mode."
The factory default is Single Screen.
NOTE:
The Guidance Mode can also be
selected on the Icon Selection screen.
See Showing Icons on the Map on
page 67.