By Today's Destinations; Editing Today's Destinations List - Acura 2010 RDX Navigation System Owner's Manual

Entering a Destination
If desired, rotate the Interface Dial
knob to change the map scale. When
you have the crosshairs on the desired
icon, map feature, or road, push in on
the Interface Dial. The address of the
location you have selected will appear at
the top of the screen.
NOTE:
The selected icon or road segment is
displayed on the 1/2 mile (800 meter) or
less map scale.
If this is the desired address, push in on
the Interface Dial again. If not, use the
Interface Dial to reposition the
crosshairs, then push in on the
Interface Dial again to display the new
address.
If you selected a single icon or road
segment, select Set as Dest. to
calculate a route to the selected
destination. If you selected multiple
icons within the cursor radius, select an
item from the list. Then select OK to
calculate a route to the selected
destination.
48 Navigation System

By Today's Destinations

You can create a "trip" by combining up
to five destinations previously selected
on the Calculate route to screen.
Select Today's Destinations from
the MENU screen (Enter destination
by) and the display changes to:
NOTE:
If Today's Destinations is grayed
out, there are no Today's Destinations
entered.
2010 RDX
Editing Today's Destinations
List
If you change your plans, you can
modify the Today's Destinations list
order by distance or order of entry.
Say or select Sort by Entry to sort the
list by the entry order, and say or select
Sort by Distance to sort the list by the
distance order. To delete a destination,
say or select DELETE and the display
changes to the Select a destination to
delete screen. Select the destination to
delete. Say or select DONE to perform
the deletion, and the display returns to
the previous screen. To cancel the
deletion, press the CANCEL button.
NOTE:
For information on the available voice
commands, see Voice Command Index
on page 158.