Changing Tuning Grid - Philips MCM530 User Manual

Changing tuning grid (not available
for all versions)
In North and South America, the frequency step
between adjacent channels in the MW band is
10 kHz (9 kHz in some areas). The preset
frequency step in the factory is 9 kHz.
IMPORTANT!
Changing the tuning grid will erase all
previously stored preset radio stations.
1
2
1
Disconnect the system from the AC power
supply (pull out the AC power cord).
2
While holding down PROG and á on the
main unit, reconnect the system to the AC
power supply.
➜ The display will show "GRID 9" or "GRID
10".
Note:
– GRID 9 and GRID 10 indicate that the tuning
grid is in step of 9 kHz and 10 kHz respectively.
– The FM tuning grid also will be changed from
50 kHz to 100 kHz or vice versa.
2
Tuner Operations
21