Table of Contents
Advertisement
Available languages
Available languages
Installation
Machine Dimensions
Dimensional Clearances
Allow a minimum of 24 inches (609 mm) at
the rear and a minimum of 12 inches (304 mm)
at the sides. Recommended clearance at the
sides is 18 inches (457 mm). Figure 2–2
illustrates the machine dimensions.
Note: The dimensions shown are for planning
purposes only. They are approximate and
subject to normal manufacturing tolerances. If
exact dimensions are required for construction
purposes, contact the distributor or the
manufacturer. We reserve the right to make
changes at any time without notice.
2–8
F232097R1
Advertisement
Chapters
Table of Contents
