Table of Contents
Advertisement
Available languages
Available languages
Optional feature page
Using Video In
(This feature is optional, depending on whether or not the card has VIVO feature.)
5.1 Capture full motion or still image video
Your HIS series VIVO card has Video In capability for capturing full motion
or still image video. Use the 4-headed Input/Output adapter to connect a
VCR, camcorder, or laserdisc player to your card, as shown.
The video output connectors on your VCR, camcorder, or laserdisc player will be similar to these.
Use S-VIDEO OUT or COMPOSITE VIDEO OUT. S-Video will provide better results.
COMPOSITE
S-VIDEO
OUT
OUT
OR
Connecting Your video device
1.
Turn off your computer and your VCR, camcorder, or laser disk player.
2.
Ensure your graphics card is installed correctly.
3.
Locate the S-Video Output or the Composite Output on your VCR, camcorder,
or laser disk player.
4.
Looking at the back of your computer, locate your graphics card. Using a
Composite cable or S-Video cable, attach one end of the cable to Video In on
your graphics card and the other to the Video Output on your video device.
5.
Turn on your computer and your video device.
6.
Use Video Editing Software to capture streaming Video or still images.
For Video-in, Video-Out (VIVO) model only
4-headed Input/Output Adapter
Video-Out
Video-In
10
GB
5
Advertisement
Table of Contents
