Troubleshooting Guide - Haier HTN13G11F User Manual

Troubleshooting
Before calling for service, try fixing the problem with one of these minor
adjustments.
Power
TV is not turning ON:
• Check that the power cord has been plugged into the outlet properly.
• If the plug has been properly plugged in but the TV still does not turn on, try plug-
ging something else into the outlet to make sure there is power. If not, you must
use another working outlet.
• Make sure you are aiming the remote control directly at the sensor on the TV. Stay
within the range required to receive a signal from the remote.
• Replace the batteries in the remote control and try turning it on again.
• If the TV still does not turn on, there may be a problem with the sensor. Try turning
it on by pressing power button on the TV.
TV has power but there is no sound and no picture:
• The channel may be inactive. Switch to another channel.
• Check the hookup of other components such as the cable box, receiver and
set-top box. You may need to have one of above components turned on in order
for the TV to turn ON.
• The TV may be in video mode. Press the TV/Video button for TV mode.
• When using the VCR, make sure the TV/VCR button is set on VCR. Make sure
that the TV is tuned to the same channel as the switch on the back of the VCR.
Picture
Snowy Video:
• Check the antenna connections. Adjust the antenna location.
Multiple Images:
• Check the cable wire connection. Adjust the antenna connection and location.
English
34