Electronic Temperature Controls; Allowing Cooling Time Before Use; Setting Cooling Temperatures/Adjustment; Temperature Display - Frigidaire 241856001 Use And Care Manual

ALLOWING COOLING tImE BEfORE USE

To ensure safe food storage, allow your refrigerator to operate with the doors closed for at least 8 to 12 hours before placing food
inside. During this cooling period, you do not need to adjust the controls, which are preset at the factory.
SEttING COOLING tEmPERAtURES
Your refrigerator comes with a state-of-the-art electronic digital control system. The system's control panel is located at the top of
the the fresh food compartment.
The two digital displays on the left half of the control panel indicate the current settings or temperatures of your freezer and fresh
food compartments. The models with a 2-digit temperature display are for reference only, and do not display the current accurate
compartment temperature. Should you desire to see what the current accurate temperature is, place a separate thermometer
inside the freezer or fresh food compartment in the desired location.
(Single Digit Display - Features may vary.)
Temperature Control Range
Fahrenheit
Warmest
Warmer
Factory Setting Midpoint
Colder
Coldest

ELECtRONIC tEmPERAtURE CONtROLS

Freezer Fresh Food
Centigrade Fahrenheit
6º -14º 47º
0º -18º 37º
-6º -21º 33º
tEmPERAtURE ADjUStmENt
To adjust the temperature to a higher or lower setting,
press the Up (Cold) or Down (Colder) button closest
to the display. The first time you press the button, the
display shows current setting you entered. Each press
of the button after that changes the setting by one.
The display shows your new setting momentarily, then
changes back to the current temperature.
If tEmPERAtURE DISPLAYS fLASH...
If ever you see both temperature displays continuously flashing, it may
indicate that the control system has detected a performance problem. Call
your service representative, who can interpret the flashing message.
To maintain temperatures, a fan circulates air in the refrigerator and freezer
compartments. For good circulation, do not block cold air vents with food
items.
Numeric Display
Warmest
Factory Setting
Centigrade
Coldest
8º
Temperature Adjustment
3º
If Fresh Food compartment is too warm
1º
If Fresh Food compartment is too cold
If Freezer compartment is too warm
If Freezer compartment is too cold
7
NOtE
The advanced electronic
control system in your
refrigerator includes
additional display modes
that service professionals
can use to rapidly diagnose
performance issues.
freezer fresh food
1 1
6 6
9 9
Adjust Fresh Food control one degree
colder by pressing Down (Colder)
button.
Adjust Fresh Food control one degree
warmer by pressing the Up (Cold) button.
Adjust Freezer control one degree colder
by pressing Down (Colder) button.
Adjust Freezer control one degree warmer
by pressing the Up (Cold) button.