Standard Cmos Features - Gigabyte GA-Z68XP-UD3P User Manual

2-4

Standard CMOS Features

CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
Date (mm:dd:yy)
Time (hh:mm:ss)
 IDE Channel 0 Master
 IDE Channel 0 Slave
 IDE Channel 1 Master
 IDE Channel 1 Slave
 IDE Channel 2 Master
 IDE Channel 3 Master
 IDE Channel 4 Master
 IDE Channel 4 Slave
Halt On
Base Memory
Extended Memory
Total Memory
higf: Move Enter: Select
F5: Previous Values
Date (mm:dd:yy)
Sets the system date. The date format is week (read-only), month, date and year. Select the desired field
and use the up arrow or down arrow key to set the date.
Time (hh:mm:ss)
Sets the system time. For example, 1 p.m. is 13:0:0. Select the desired field and use the up arrow or
down arrow key to set the time.
IDE Channel 0, 1 Master/Slave
IDE Channel 0, 1 Master/Slave
Configure your SATA devices by using one of the three methods below:
• None If no SATA devices are used, set this item to None so the system will skip
the detection of the device during the POST for faster system startup.
• Auto Lets the BIOS automatically detect SATA devices during the POST. (Default)
• Manual Allows you to manually enter the specifications of the hard drive when the hard
drive access mode is set to CHS.
Access Mode Sets the hard drive access mode. Options are: Auto (default), CHS, LBA, Large.
IDE Channel 2, 3 Master, 4 Master/Slave
Extended IDE Drive
Configure your SATA devices by using one of the two methods below:
• Auto Lets the BIOS automatically detect SATA devices during the POST. (Default)
If no SATA devices are used, set this item to None so the system will skip
• None
the detection of the device during the POST for faster system startup.
Access Mode Sets the hard drive access mode. Options are: Auto (default), Large.
BIOS Setup
Standard CMOS Features
Wed, May 11 2011
22:31:24
[None]
[None]
[None]
[None]
[None]
[None]
[None]
[None]
[All, But Keyboard]
640K
1022M
1024M
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
- 46 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults