Frequency/Voltage Control - Gigabyte GA-8GEM667 Series User Manual

Frequency/Voltage Control

CMOS Setup Utility-Copyright (C) 1984-2002 Award Software
CPU Clock Ratio
CPU Host Clock Control
"
CPU Host Frequency (Mhz)
"
Fixed PCI/AGP Frequency
Host/DRAM Clock ratio
Memory Frequency (Mhz)
PCI/AGP Frequency (Mhz)
"#$%: Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F3: Language F5:Previous Values F6:Fail-Safe Defaults
"Those items will be available when "CPU Host Clock Control" is set to Enabled.
! ! ! ! ! CPU Clock Ratio
This setup option will automatically assign by CPU detection.
For Willamette CPU:
8X~23X default: 14X
For C-Stepping P4:
8X,10X~24X default: 15X
For Northwood CPU:
12X~24X default: 16X
The option will display "Locked" and read only if the CPU ratio is not changeable.
! ! ! ! ! CPU Host Clock Control
Note: If system hangs up before enter CMOS setup utility, wait for 20 sec for times out reboot . When
time out occur, system will reset and run at CPU default Host clock at next boot.
!Disable
Disable CPU Host Clock Control.(Default value)
!Enable
Enable CPU Host Clock Control.
GA-8GEM667 Series Motherboard
Frequency/Voltage Control
15X
Disabled
133
33/66
Auto
266
33/66
Figure 8: Frequency/Voltage Control
- 40 -
Item Help
Menu Level &
F1:General Help
F7:Optimized Defaults