Gigabyte GA-880GA-UD3H User Manual page 38

IGX Configuration
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
Internal Graphics Mode
UMA Frame Buffer Size
x Surround View
Onboard VGA output connect
VGA Core Clock control
x VGA Core Clock(MHz)
higf: Move Enter: Select
F5: Previous Values
Internal Graphics Mode
Allows you to determine whether to allocate system memory for the onboard graphics controller.
Disabled Disables the onboard graphics controller.
UMA Allocates memory for the onboard graphics controller from the system memory. (Default)
UMA Frame Buffer Size
Frame buffer size is the total amount of system memory allocated solely for the onboard graphics con-
troller. MS-DOS, for example, will use only this memory for display. Options are: Auto (default), 128MB,
256MB, 512MB.
Surround View
Enables or disables the Surround View function. This option is configurable only if Init Display First
under Advanced BIOS Features is set to PEG and an ATI graphics card is installed. (Default: Disabled)
Onboard VGA output connect
Specifies the graphics display of the onboard graphics output from the D-SUB/DVI-D or D-SUB/HDMI.
Auto BIOS automatically determines the primary display port for output, depending on to
which port the display device is connected, D-SUB/DVI-D or D-SUB/HDMI. (Default)
D-SUB/DVI Sets the D-SUB/DVI-D as the graphics display.
D-SUB/HDMI Sets the D-SUB/HDMI as the graphics display.
VGA Core Clock control
Allows you to determine whether to manually set the VGA Core clock. (Default: Auto)
VGA Core Clock(MHz)
Allows you to manually set the VGA Core clock. The adjustable range is from 200 MHz to 2000 MHz.
This item is configurable only if the VGA Core Clock control option is enabled.
BIOS Setup
IGX Configuration
[UMA]
[Auto]
Disabled
[Auto]
[Auto]
560
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
- 38 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults