Advertisement
Unpacking the Monitor Box
Remove all the items from the box, making
sure the following items are included:
Monitor
Base
E182H/E192HQ/E202H
www.emachines.co m
www.emachines.com
P/N: MU.Q2200.001
This CD contains:
• User Guide
This CD contains:
• User Guide
• Setup Poster
• Setup Poster
• Acrobat Reader
• Acrobat Reader
E182H/E192HQ/E202H
User Guide
Quick Guide
V
VGA
Power
c
ca
ble
cord
Getting Help
Visit the tech support site at
www.emachines.com
Easy Steps to Set Up Your Monitor
4
Actual product may vary from image shown.
English
Connect the
monitor base
Slide the neck onto the base
until it snaps into place.
Connect your monitor
to your computer
Plug in the monitor
To protect your monitor from
power fluctuations, use a surge
protector.
4
Turn on the monitor
E180H/E190HQ/E180HV/E190HQV
Advertisement
Table of Contents
Need help?
Do you have a question about the E180HV and is the answer not in the manual?
Questions and answers
wont attach to pc
The eMachines E180HV monitor may not attach to the PC due to several possible reasons:
1. Incorrect Cable Connection – Ensure the VGA cable is properly connected to both the monitor and the PC.
2. Loose or Damaged Cable – Check if the cable is securely plugged in and not damaged.
3. Power Issues – Ensure the monitor is plugged into a power source and turned on.
4. Incompatible Video Mode – The PC may be set to a resolution or refresh rate not supported by the monitor.
5. Graphics Card or Port Issues – The PC’s video output port may be faulty or not configured correctly.
Check these factors to troubleshoot the issue.
This answer is automatically generated