Table of Contents
Advertisement
INITIAL INSTALLATION
Select your local time referring to the city
name displayed on the screen. Local time can
+/-
be adjusted
12 hours in reference to UTC.
For example, if you are in London, local time
shall be 0:00.
If daylight saving time is in effect, select ON
from the menu.
Local time will be automatically set. To
continue, select NEXT and press the OK key.
Select the antenna index and the type that you
want to configure. If you have the antenna
with DiSEqC 1.2 motorized system, then you
can use the DiSEqC 1.2 functions.
Before using the DiSEqC 1.2, you have to set
the limit of antenna movement.
If you select the DiSEqC 1.2 in the antenna
type, you will see 3 buttons of limit setting.
Select the switches with which you want to
configure the antenna.
These switches are related to the antenna
selection, and you can select up to 8 antennas
with the combination of these switches.
For example, if you have 2 antennas, you can
assign Antenna 1 for 0 volt and 14 volt, Antenna 2
for 0 volt and 18 volt.
If you have only one antenna, select all of the
switches as None.
Select a satellite from the pre-programmed
list. You have to select a proper satellite
considering the installed antenna direction and
switch selection.
Note
: The
Digital Satellite Receiver
up to 64 satellites.
Setting Time
Selecting Antenna
Selecting Switch
Selecting Satellite
can store
10
Advertisement
Table of Contents
