NEC NRP-47CR Instruction Manual page 22

Method of changing the component Input selection
through Menu button
-21-
Press the Menu button.
• Press the "¢∏ VOL¢º" button until the "°‚ " mark will come
on the "Special".
• Press the "°„ " button in the "°‚ " mark will come on the
"Special"
VOL VOL
Select "Component 1" or "2" from the "Special".
• Component Off is repeated whenever pressing the "VOL¢º" button.
• Component 1 is repeated whenever pressing the "VOL¢º" button.
• Component 2 is repeated whenever pressing the "VOL¢º" button.
VOL VOL