DRAWING YOUR ATTENTION Thank you purchasing this VCP, developed to provide advanced features and functions for high quality performance. To obtain the best results and to avoid malfunction, PLEASE CAREFULLY READ THE DESCRIPTIONS AND OPERATING PROCEDURE CONTAINED IN THIS OWNER’S MANUAL PRIOR TO OPERATING THIS VCP.
IMPORTANT SAFEGUARDS IMPORTANT SAFEGUARDS Ventilation – The slots and openings in the – Never block the slots and openings by placing For your protection, please read these safety instructions completely before operating cabinet are provided for necessary ventilation. To the set on a bed, sofa, rug or other similar the appliance, and keep this manual for future reference.
IMPORTANT SAFEGUARDS IMPORTANT SAFEGUARDS SERVICE IMPORTANT NOTES Damage Requiring Service – Unplug the set – If the set has been subjected to excessive • Audio-visual material may include works of copyright which must NOT be recorded from the wall outlet and refer servicing to shock by being dropped, or the cabinet has without the authority of the owner of copyright.
TABLE OF CONTENTS INTRODUCTION CONGRATULATIONS on your purchase of a new VHS VCP. NOTE : This Video Cassette Player is compatible with any Video Player bearing the VHS mark. The VCP is designed to expand your opportunities for home This VCP is an existing, new VCP designed to satisfy all your VHS tape play and viewing and not for any usage which might violate the copyright laws.
IDENTIFICATION IDENTIFICATION This section summarizes the buttons, controls, and terminals that you will use with your FRONT PANEL DISPLAY VCP. STANDBY/ON Press to turn the VCP on or off. STOP/EJECT Press to stop tape movement and to eject a video cassette. 1.
Page 7
IDENTIFICATION IDENTIFICATION REMOTE CONTROL BASIC FUNCTION REMOTE CONTROL OPERATION RANGE 1. Any object between the remote control and VCP will block the path of beam when it is being used. Dark walls, direct sunshine or very bright (incandescent) light will reduce the remote control sensitivity.
TO GET STARTED VIDEO CHANNEL SETTING The built-in RF converter permits The converter channel of all units is set ANTENNA CONNECTION playback of video and audio recordings to UHF channel 36 prior to shipment. 1. Remove the Antenna Cable from the TV set. Connect it to the “ANT.IN” terminal of through a TV receiver.
BASIC OPERATION BASIC OPERATION CASSETTE LOADING/UNLOADING BASIC PLAYBACK Each key of remote control functions identically with the keys on the front panel. LOADING UNLOADING Œ Push the cassette into the cassette Œ Press the STOP/EJECT key twice on the NOTE : This VCP has Full Auto Function. NOTE : If the cassette without the safety tab is inserted, the VCP will operate compartment gently.
SPECIAL OPERATION SPECIAL OPERATION The VCP enters into the PLAYBACK mode during special operations as soon as pressing VISS the PLAY key. • when you press the VISS - Key, the VCP will rewind the tape to the viss marked point and will start to playback Œ...
VIDEO SYSTEM RECORDING TV PROGRAMS Since this VCP has no its own TUNER, this has no function to receive TV RECORDING / PLAYBACK VIDEO SYSTEM broadcasting signals. To record TV programs, please use the another TV or VCP having the function to •...
BEFORE CALLING SERVICE PERSONNEL RECORDING TV PROGRAMS Before calling service personnel, check the following points for a possible cause of the INDIRECT RECORDING (BY VCR WITH TUNER) trouble. A minor adjustment on your part may eliminate the trouble. CONNECTION SYMPTOMS POSSIBLE CAUSES •...
SPECIFICATIONS General Power requirement AC90-250V~, 50/60Hz Power consumption 14 watts Weight 3.8 kg (Net : 2.7kg) Temperature Operating: 5°C to 35°C Storage: –20°C to 60°C Tape deck section Format VHS standard Video signal system PAL/MESECAM/NTSC(3.58/4.43) color signal Scanning system Rotary, slant azimuth, two-head helical scan system Tape width 12.65 mm Tape speed...
Need help?
Do you have a question about the T150W and is the answer not in the manual?
Questions and answers