Page 1
ACP-5010RDS CD Player/Receiver with 4-Channel High Power Output Flip Down Detachable Face Panel & ISO DIN Mounting Chassis 4-Channel high Power(40W 4Ch) Electronic Tuning Electronic Volume/Bass/Treble/Balance/ Fader 42Memory Capability (18FM + 12MW + 12LW) Loudness & Mute Controls Detachable Face for Anti-Theft...
WIRING CONNECTIONS The pins in the ISO connector have the following functions (connector seen from the rear) A. ELECTRIC CONNECTIONS 1. T.MUTE : BROWN 4. Back-up+12V : YELLOW 5. +12V (electric antenna) : BLUE 6. Dimmer : PINK 7. +12V supply(from ignition lock) : RED 8.
Page 3
HOW TO INSTALL & REMOVE THE APPARATUS NOTE ! Press the release knob to open up the front panel and detach it by Use only the supplied mounting hardware for safe and secure pulling it towards you. installation. Please consult your nearest dealer if you get any problems with Insert the enclosed handles into the slits of the unit, as illustrated, installation.
FRONT PANEL Attaching the front panel 1. Holding the panel at its top and bottom edges. 2. Attach one side of the panel lightly first, then push the other side of the panel into the unit. 3. Do not press the panel hard against the unit. It can be attached by pressing it lightly.
Page 5
FUNCTION DESCRIPTION, CONTROLS 1. POWER ON / OFF 10. TA / TP STANDBY 2. AUDIO SELECTOR 11. CD BUTTON 3. TUNING & TRACK UP / DOWN 12. TOP 4. PRESET BUTTON 13. INTRO SCAN 5. BAND CONTROL 14. REPEAT 6. AUT (AUTO TRAVEL PRESET) 15.
Page 6
RADIO 1. POWER ON/OFF (POWER In case of CD mode: This button is to track up/down To switch the audio system off, press power button lightly. In case of clock mode: Simultaneously, the system memorizes all information about its This button is to hour/minute up current setting, and restores the information when you turn the system on by pressing the power on/off button again.
RADIO 6. AUTO TRAVEL PRESET (AUT, 8. DISPLAY CONTROL (DISP, When pressed belower than 1.5 seconds. Press the AUT button within 1.5 seconds, you can change the present clock is displayed. radio mode to the AUT function that operates all over the radio another key is not pressed during 5 seconds, it is changed band.
RADIO USING THE RDS FUNCTIONS What is RDS? RDS digital data includes various data : PI ... Program Identification The RDS(Radio Data System) is a digital information system Recognizes the country code and the program of the channel. developed by the EBU(European Broadcasting Union). Pick-a- backed on normal FM broadcasts, RDS offers a variety of PS ...
Page 9
RADIO USING THE RDS FUNCTIONS 9. AF(network following) reception (AF, This unit returns to the stronger alternative transmitter in the list of The AF-function is only possible with FM. To select AF-function alternative frequencies(AF). The display indicates “AF” as switch to FM and press the button AF/REG for about 1.5 seconds. confirmation on the display.
Page 10
RADIO USING THE RDS FUNCTIONS Change-over to regional program (REG, 10. Traffic broadcast recognition (TA, At certain times some national radio stations broadcast regional If the button “TA/TPST” is pressed for less than 1.5 seconds, program. It is possible to pre-tune these station by pressing button RDS-stations transmitting traffic information can be heard.
Page 11
RADIO USING THE RDS FUNCTIONS What is EON? Traffic information recognition (TPST, If the RDS-station tuned on, the unit recognizes RDS-frequencies EON(Enhanced Other Network) is a new RDS service provided by with traffic information(TPST). “TPST” will be indicated on the certain station networks.
Page 12
RADIO USING THE RDS FUNCTIONS Selecting the PTY function Program types Display Program types Display Depress the button for approx. 2 seconds to tune on the PTY- SPEECH Speech Science SCIENCE function. If the station just receives a PTY-program the indication of the program name lights in the display window.
COMPACT DISC PLAYER To go to the beginning of desired track Listening to a CD Track up & Down. During play, press either the track up ( )or the track down( button for less than one second. When you wish to locate a particular program, press the track/tune button in desired direction.
COMPACT DISC PLAYER 12. TOP Function (TOP, At anytime you want to listen to the title song of disc, press this button softly. Then the CD will be played from the NO.1 track. 13. Intro Scan (INT, MAINTENANCE AND PRECAUTIONS Press the INT button to know what songs are on the disc.
COMPACT DISC PLAYER USING THE COMPACT DISC Cleaning discs Note: Do not insert a disc with the label surface down. Doing so may Before playing, clean the disc with an optional damage the unit. cleaning cloth. Do not try to insert another disc when one Wipe the disc in the direction of the arrow.
SPECIFICATION GENERAL Dimensions (W H D) Power requirement DC 12.0V / Rated : 14.4V Escutcheon 188 58 15 mm (Usable:10.8 ~15.6V)Negative Body 178 50 165 mm ground Weight (Net) 1.8 kg Maximum output power 160watts total Controls Rated output power 40 watts per channel into BASS/TREBLE 10dB at 100Hz/10kHz...