Installation Preparation; Removing Freezer/Refrigerator Door; The Door, Follow These Steps - Daewoo FRS-250BAL User Manual

Installation Preparation

Check if the refrigerator can pass
a doorway or enter a door first.
Dimensions( including Door Handles)
FRS-280 ***
928mm
(Width * Depth * Height)
FRS-250 ** * 928mm
(Width * Depth * Height)
Find a suitable place to install
❈ Sufficient space from refrigerator back to the
wall for free air ventilation
Once the installation place is ready follow the installation instructions.
If surround temperature of refrigerator is low (below 5 ), foods can be frozen or the refrigerator can work
in abnormal way.
896mm 1808mm
816mm 1808mm
❈ Avoid direct sunlight.
16
If the refrigerator can not enter

the door, follow these steps.

Removing Freezer Door
Remove the bottom cover first. Unscrew top hinge cover with a
1 2
Pull out the left collar of the coupling
screw driver.
first, then hold the coupling and pull
Insert a thin screw driver into the
out the left water tube.
side groove of the cover to remove.
Lift up the front of hinge to remove.
4
Be careful not to damage the water
5
( After the hinge is removed the
line when removing the door.
door can fall down forward. Be
careful !)
!
@
Removing Refrigerator Door
1 Unscrew top hinge cover with a 2 Turn top hinge fastener
screw driver. counterclockwise 3~4 times.
Insert a thin screw driver into the Disconnect harness wires.
side groove of the cover to remove.
4 Lift the door straight up to remove.
!
!
@
@
❈ Remove front bottom cover first, if it is attached.
3 Turn top hinge fastener
counterclockwise 3~4 times.
Disconnect the harness wires.
!
!
@
Lift up the front of hinge to remove.
3
(After the hinge is removed the door
can fall down forward. Be careful !)
!
17
!