In 1 Function - AEG FAVORIT 86070 VI User Instructions

Hot steam may escape when the dishwasher door is opened. There is a
1
risk of scalding. Therefore:
0 1. Open the dishwasher door carefully.
The dishwasher cycle will stop.
2. Press the button for the new dishwasher cycle and hold it down.
Then the indicator for the current cycle will flash.
After a few seconds just the indicator for the new dishwasher cycle will
be lit.
3. Release the programme button.
4. Close the dishwasher door.
The newly selected dishwasher cycle begins from the start.
Interrupting the dishwasher cycle by opening the dishwasher door
0 1. Open the dishwasher door.
The dishwasher cycle will stop.
2. Close the dishwasher door.
The dishwasher cycle will continue.
Cancelling a dishwasher cycle
0 1. Open the dishwasher door.
2. Press function buttons 2 and 3 and keep them pressed down for about
1 second.
The LED indicators for all programme buttons (and the button for the
delay start timer if present) light up. The LED indicators and any option
buttons that are present only light up if they are activated.
3. Release the function buttons.
The dishwasher cycle has been cancelled.
4. Switch off the dishwasher using the ON/OFF button.

3 in 1 function

Your appliance is equipped with a special additional function that ena-
bles optimal use of 3-in-1 dishwashing tablets and whereby the addi-
tion of rinse aid and special salt is not required.
This additional function can be selected together with all dishwashing
cycles.
0 1. Place the 3-in-1 dishwashing tablet in the detergent container.
2. Switch on the appliance.
Operating Instructions
33