AEG OKO-FAVORIT 54750 VI Operating Instructions Manual page 11

Level
(german degrees)
1
2
3
4
5
If your water hardness is level 1 it is already soft and therefore there is no need
to use salt. With the setting of the water softener at level 1 the salt indicator
light on the control panel will always remain off.
To set a different level, proceed as follows:
1. Press the "Intensive 70°" and "Bio 50°" programme push buttons simultaneously
for about 5 seconds. The pilot light corresponding to the current level flashes.
2. Press within 5 seconds the programme push button corresponding to the
required level. After 5 seconds the dishwasher will memorise the new level setting
and will return to programme setting mode.
The setting will remain memorised after switching off the dishwasher.
SO292
Water hardness
dH°
(french degrees)
0 - 4
5 - 11
12 - 22 21 - 40
23 - 39 41 - 70
40 - 50 71 - 90
°TH
(parts per million)
0 - 8
9 - 20 81 - 200
201 - 400
401 - 700
701 - 900
Use
PPM
of salt
0 - 80 NO
YES
YES
YES
YES
11