Original Noise Adjustment - Native Instruments Scarbee Clavinet & Piano User Manual

3.9 Original Noise Adjustment

For the Scarbee Clavinet, we recorded the original noise before we removed the noise from
the samples using sophisticated noise-reduction. We made certain that samples were not
degraded in quality after removing the noise, not even the highest frequencies.
The default setting is the exact original level of noise. Noise will play along with other samples
when you hit a key and since the noise sample is mapped to 1 note polyphony, you always
get the same amount of noise no matter whether you play 1 key or 30. Feel the magic when
turning down the noise to zero!
•
Instrument Noise level: move the knob to set the level of the hum & hiss noise. Original
recording level of the noise is middle position.
•
Instrument Noise release: move the knob to set the release time of the noise. Default
setting is middle. If you want noise to be present the whole time in a song or on stage
you should turn the knob beyond middle position.
Scarbee Clavinet and Pianet – User Manual – 16