Native Instruments Studio Drummer User Manual page 21

Solid Bus Comp
Solid B-Compression effect
Also available as a fully-fledged product in its own right, this virtual reproduction of a leg­
endary compressor adds presence and drive to your drums without blurring the detail.
▪ The ATTACK knob adjusts the amount of time in milliseconds that it takes for the com­
pressor to reach the ratio after the input signal exceeds the threshold level.
▪ The RELEASE knob adjusts the amount of time in milliseconds that the compressor will
take to stop affecting the sound after the input signal falls below the threshold.
▪ The THRESHOLD knob adjusts the level in dB that the input signal must exceed before
the compressor starts affecting the sound.
▪ The RATIO knob controls the amount of compression expressed as a ratio of "input lev­
el" to "output level change". The higher the
level will be reduced as the sound goes beyond the threshold.
▪ The MIX knob allows you to add the dry signal to the mix as well, for a parallel com­
pression sound.
▪ The MAKEUP knob allows you to increase the overall output level of the compressed
sound.
▪ The OUTPUT knob on the right side adjusts the overall output level.
RATIO knob is set, the more the output
STUDIO DRUMMER - Manual - 21
The Performance View
Mixer Page