With Another Audio Source; Through Another Audio Component - Optimus CDG Karaoke System Owner's Manual

32-1166.fm Page 11 Wednesday, November 17, 1999 4:51 PM
6. Adjust the sound with
. See "Adjusting the Sound" on
UME
Page 12.
7. Set each connected microphone's
switch to
ON/OFF
into the microphone along with the
music.
8. Use and/or
MIC VOL 1
adjust the volume of each micro-
phone.
9. Adjust and
ECHO
for the desired reverberation and
pitch. See "Adjusting the Sound" on
Page 12.
10. Adjust
TAPE SPEED (
ing a tape). See "Adjusting the
Sound" on Page 12.
11. To stop a tape, press
on the deck you are using.
Press
STOP/EJECT
open the cassette compartment
door and remove the tape.
12. Set each microphone's
switch to , then press
OFF
turn off the system. The POWER
indicator turns off.
WITH ANOTHER AUDIO
MASTER VOL-
SOURCE
If you connect another audio source, fol-
. Sing directly low these steps to sing along with that
ON
audio source.
to
MIC VOL 2
TONE CONTROL
if you are play-
STOP/EJECT
again to
ON/OFF
to
POWER
THROUGH ANOTHER
AUDIO COMPONENT
If you connected another audio compo-
nent, follow the steps in "With Another
Audio Source" so you can hear your
voice and music through another com-
ponent. Except in Step 3, turn on the au-
dio component, and be sure to turn it off
(Step 7) when you finish.
1. Set
FUNCTION SELECTOR
2. Press to turn on the system.
POWER
The POWER indicator lights.
3. Turn on the audio source.
4. Adjust the sound with the controls
explained in "Adjusting the Sound"
on Page 12.
5. Set each connected microphone's
switch to
ON/OFF ON
into the microphone along with the
music.
6. Use and/or
MIC VOL 1
adjust your voice's volume.
7. When you finish, set each micro-
phone's ON/OFF switch to OFF,
press to turn off the system,
POWER
then turn off the audio source.
to .
AUX
. Sing directly
to
MIC VOL 2
11