Summary of Contents for Optimus Three-Way Bass Reflex
Page 1
Three-Way Bass Reflex Car Speaker System (120-1725) Features Faxback Doc. # 38063 Your Optimus Three-Way Bass Reflex Car Speaker System is designed to give you clean sound with powerful bass. The system is ideal for rear-deck mounting. To get the best sound from your speakers, please read all of these instructions carefully for the proper wiring and mounting procedures.
Three-Way Bass Reflex Car Speaker System (120-1725) Wiring the Speakers Faxback Doc. # 38064 Connect two speakers to your auto sound system as shown. NOTES: If your autosound system has a front-to-rear fader, follow the instructions in the audio component's manual for the correct speaker connections.
Page 3
mounting position. Then determine the center of the mounting position. Drill a hole 1/4-inch wide in the center of the mounting position. Attach the bolt to the bottom of the speaker cabinet and secure the bolt using a Phillips screwdriver. Position the speaker cabinet on the mounting surface by inserting the bolt through the drilled hole.
Page 4
Three-Way Bass Reflex Car Speaker System (120-1725) Specifications Faxback Doc. # 15674 Crossover Capacitor Size..............5x11 mm Capacitance........2.2 micro Farad, 50 V (B/P) Speaker Size: ........... 3 1/2-inch woofer 2-inch midrange 1 1/2-inch tweeter Barium Magnet Weight: ..........5.36 oz Power Handling Capacity: ........30 Watts each Impedance: ............
Page 5
Audio Connection Information (120-Series) Plug/Male 2 Ch. System Faxback Doc.# 19994 +----+--------------+---------------+------------+------------------------+ |Pin | |No. | WIRE COLOR WIRE SPECS. LABEL REMARK +----+--------------+---------------+------------+------------------------+ WHT/BLK AWG #20 FRONT L- STRIP SOLDER 2P CORD +----+--------------+---------------+------------+------------------------+ GRY/BLK " FRONT R- " +----+--------------+---------------+------------+------------------------+ +----+--------------+---------------+------------+------------------------+ +----+--------------+---------------+------------+------------------------+ BLACK AWG 206...
Page 7
|Pin | |No. | WIRE COLOR WIRE SPECS. LABEL REMARK +----+--------------+---------------+------------+------------------------+ WHT/BLK AWG #20 FRONT L- STRIP SOLDER 2P CORD +----+--------------+---------------+------------+------------------------+ GRY/BLK " FRONT R- " +----+--------------+---------------+------------+------------------------+ GRN/BLK " REAR L- " +----+--------------+---------------+------------+------------------------+ VIO/BLK " REAR R- " +----+--------------+---------------+------------+------------------------+ BLACK AWG 206 GROUND 6.3mm r FORK TERMINAL |...
Page 8
+---------+--------------+ White Right (-) +---------+--------------+ Brown Left (+) +---------+--------------+ Gray Left (-) +---------+--------------+ +12 V Power | +---------+--------------+ REAR +---------+--------------+ | GRN/BLK | Right (+) +---------+--------------+ | WH/BLK | Right (-) +---------+--------------+ | BR/BLK | Left (+) +---------+--------------+ |GRAY/BLK | Left (-) +---------+--------------+ +---------+--------------+ | Orange...