Philex RC027 SLX User Manual

Slx digital satellite remote universal pre-programmed remote control

Advertisement

RC027 SLx Digital Satellite Remote
Universal Pre-programmed Remote Control

USER GUIDE

RC027
27834S+
Set up instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pages 2-5
Codes for televisions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pages 6-8
Introduction
The RC027 remote has been designed as a direct replace-
ment for existing digital satellite receiver remote controls
(eg Sky™ and Sky+™)*. All functions are the same and the
layout mirrors that of original remotes to make life as easy
as possible for the user. The RC027 is fully preprogrammed
to operate all digital satellite receivers.The RC027 will also
operate the basic functions of many popular TVs, after the
correct code has been entered, see "How to set up your
RC027" (page 3).

Installing Batteries

Your RC027 requires 2 fresh AAA-size (LR03) batteries
(alkaline batteries recommended) :-
1. Remove the battery cover on the back of your RC027.
2. Insert the batteries ensuring that the polarity
corresponds with the markings in the battery
compartment.
3. Push the battery cover back in place.
Please Note
The TV code set-up procedure will cancel itself if no keys are
pressed for more than 10 seconds (in order to protect your
code against accidental re-programming, and to conserve
battery power). Therefore we advise you to read the
following instructions and to familiarise yourself with the
procedures, before attempting to program your RC027 to
operate TV functions.
Philex Customer Careline 0901 293 0038*

Advertisement

Table of Contents
loading

Summary of Contents for Philex RC027 SLX

  • Page 1: User Guide

    RC027 SLx Digital Satellite Remote Universal Pre-programmed Remote Control USER GUIDE RC027 27834S+ Set up instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pages 2-5 Codes for televisions .
  • Page 2: Function Keys

    Function keys Sets your RC027 to control your TV Sets the RC027 to control your SKY™ Plus receiver Sets the RC027 to control your SKY™ receiver Turns your SKY™ receiver (or TV) on and off Changes the TV volume Changes the channel Arrow buttons move the highlight around menu screens to highlight the option you want SELECT...
  • Page 3: Set Up By Auto/Manually Code Search

    How to set up your RC027 TV Set up by manually entering code The RC027 has 3 Device Modes (TV, SAT & SAT+) 1. Turn on your TV The TV section of your RC027 can be set-up either by enter- 2.
  • Page 4 9. If the Device Code does not work properly on your TV, before your TV goes into stanby mode you have reached press the TV INDICATOR KeY once. The STATUS the end of the code library. Return to step 2 and repeat INDICATOR LeD will flash briefly, and remain lit.
  • Page 5: Specifications

    Call charges from other networks may vary. • Do not use corrosive or abrasive cleansers on your RC027. teCHniCal suPPort: http://technical.philex.com • Keep the unit dust free by wiping it with a soft, dry cloth. • Do not disassemble your RC027, it contains no user Waste electrical and electronic products must serviceable parts.
  • Page 6 TV CODES BRAND CODE BRAND CODE BRAND CODE BRAND CODE BRAND CODE ACTION 0144 0223 0321 0330 0100 0144 0321 1241 COLORTYME 1022 1241 ELIN 1241 0404 1104 GRADIN 1241 0432 1024 1022 1024 1241 BECRESE 0100 0113 0140 1241 COMTEL 0414 ELITE...
  • Page 7 TV CODES BRAND CODE BRAND CODE BRAND CODE BRAND CODE BRAND CODE INGERSOL 1024 LEYCO 0222 0321 1014 1241 MITSUBISHI 1040 1101 1103 1123 ORION 0024 0443 0113 0213 PROFEX 0120 1024 1224 1241 1341 1412 0214 0222 0223 0412 INNO HIT 1331 0321 0432 1241 0003 0120 0144 0223...
  • Page 8 TV CODES BRAND CODE BRAND CODE BRAND CODE BRAND CODE BRAND CODE SALORA 0004 1313 0023 0042 SINGER 0322 0401 0402 TELEFUNKEN 0330 1040 1144 1332 WALTHAM 0004 0100 0344 0043 0100 0103 0104 1444 0113 0114 0132 1102 SINOTEC 1104 WARDS 1201 1241...

This manual is also suitable for:

Rc02727834s+

Table of Contents