Troubleshooting (Windows Vista) - Pioneer N-50 Operating Instructions Manual

Troubleshooting (Windows Vista)

When using Windows XP , see page
1. No sound
In the event the N-50's power is set to Standby, or the source input is set to something other
than Digital In USB, do not start your computer's media player software. Change the input to
Digital In USB before starting your computer's media player.
Click on [Start] t [Control Panel] t [System and Maintenance] t [System].
1
2 From the [Tasks] list, click on [Device Manager].
6
4; for Windows 7, see page 10; for Mac OS X,
Procedure continues.
3 Click on [Sound, video and game controllers] and confirm that [Pioneer USB
Audio Device] is listed.
see page 14.
4 Click on [Universal Serial Bus controllers] and confirm that [USB Composite
Device] is listed.
If the above devices are not listed as described, confirm that the N-50's input source is set
to Digital In USB, then either disconnect and reconnect the USB cable, or set the power to
Standby then turn it On again.
Procedure continues.