Table of Contents
Advertisement
• Set up call rejection messages: allows you to manage both
existing rejection messages and create new ones.
• Answering/ending calls: allows you to manage the settings
for answering and ending calls.
–
The home key answers calls allows you to press
answer the phone.
–
Voice control allows you to answer incoming voice calls using
voice.
–
The power key ends calls allows you to press the power key
to end the current call.
• Turn off screen during calls: allows you to force the screen to
turn off during an active call.
• Call alerts: allows you to assign call alert tones and activate
call alerts and vibration.
–
Call vibrations: vibrates the phone when the called party
answers. Choose from: Answer vibration or Call-end vibration.
–
Call status tones: assigns sounds settings during the call.
Choose from: Call connect tone, Minute minder, and Call end
tone.
–
Alerts on calls: selects whether alarm and message
notification is turned off during a call.
• Call accessories: allows you to assign headset settings during
incoming calls.
–
Automatic answering configures the device to automatically
answer and incoming call when a headset is detected.
–
to
Automatic answering timer configures the time delay before
the device automatically accepts the incoming call.
–
Outgoing call conditions configures the connected Bluetooth
device to make outbound calls within one of two settings: Even
when device locked or Only when device unlocked.
• Wi-Fi Calling: Allows you to both activate/deactivate the Wi-Fi
Calling feature and configure its settings. For more information,
refer to "Wi-Fi Calling" on page 71.
Note: If the Wi-Fi Calling feature is active and connected, the
Call forwarding feature is greyed-out and inaccessible.
• Additional settings: allows you to configure additional call
settings. For more information, refer to "Configuring
Additional Voice Call Settings" on page 296.
Changing Your Settings
293
Advertisement
Table of Contents
