Initializing The Password Manager Database; Installing Spd Server As A Service - SAS Scalable Performance Data Server 4.5 Administrator's Manual

42
Chapter 4 • SPD Server Windows Installation Guide

Initializing the Password Manager Database

Before you can start SPD Server, you must initialize the SPD Server Password Manager
database from the SPD Account Manager. To open the SPD Account Manager, use the
Windows Start button to select:Programs
Manager. The SPD Account Manager launches in a command window.
To initialize the SPD Server Password Manager database, add the group ADMINGRP to
your site by issuing the following SPD Account Manager commands:
Enter Command> groupdef
Enter group name to define> admingrp
Enter Command> quit

Installing SPD Server as a Service

You must use Windows Services to start SPD Server. Here are some shortcuts:
Select Start
services that start the SPD Server Name Server, the SPD Server host, and the SPD Server
SNET server.
Select Start
Server.
Select Start
stop SPD Server.
After SPD Server is installed as a service, you can verify SPD Services through Windows
Services. To open the Windows Services window, select:
Start
The main panel of the Services window contains a sortable list of Windows services. Scroll
down the Services list to find entries for SPD 4.5 Name Server and the SPD 4.5 Data Server.
Programs SAS
ð ð
SAS SPD Server 4.5
ð ð ð
Programs SAS
ð ð
Settings Control Panel
ð ð
SAS SPD Server 4.5
ð ð
SPD Server 4.5 Install SPD as a Service to install
ð ð
Start SPD Service to manually start SPD
ð
SPD Server 4.5 Stop SPD Service to manually
ð ð
Administrative Tools
ð
SPD Account
ð
Services
ð