Page 2
SC3112 User Guide Please ensure the phone is placed in a dry and ventilated place without corrosive air. • • Please install 2 x AAA batteries for viewing the LCD display. If the LCD does not display clearly, please change the batteries to ensure the normal function of the unit.
SC3112 User Guide PRODUCT OVERVIEW Description: 1. LCD display 16. M1 key 2. DOWN key 17. RING LED indicator 3. MEMO key 18. CHECK key 4. DELETE key PAUSE key 5. IN USE LED indicator UP key 6. M3 key Tel line jack 7.
4 otherwise, one or more phones may not ring and/or answer calls correctly. SC3112 has a REN of 1, and most other telephones have a REN of 1 unless marked otherwise.
Page 6
SC3112 User Guide the LCD. Press number key to input the date. Once done, press SET key. Press 2 to set the time. The hour and minute will be flashing on the LCD. Press number key to input the time. Once done, press SET key.
SC3112 User Guide 4. FUNCTION KEY OPERATION UP and DOWN key In any mode, press UP/DOWN key to check all the incoming numbers. If there is no incoming number, the unit will display END. The unit can receive up to 16-digit phone numbers.
SC3112 User Guide FLASH key (600ms) In the on-hook mode, press this key to auto-hang up, after that you can press REDIAL key or dial out another number. REDIAL key In the on-hook mode, press this key to redial the last dialed number.
EC Low Voltage Directive 73/23/EEC • EC EMC Directive 89/336/EEC And conforms to the following relevant harmonized standards: • EMC: EN55022, EN55024 • Safety: EN 60950 Created on 28 October 2005. SC3112 Caller ID Phone. Please visit us at www.shirocorp.com.
Need help?
Do you have a question about the SC3112 and is the answer not in the manual?
Questions and answers