Supported Hardware - Sun Microsystems Brocade 7800 Release Notes

Supported Hardware

Note – The following is intended to provide a point-in-time list of what Sun price-
listed hardware is supported by the Brocade 7800 Extension Switch and FX8-24
Extension Blade at time of release only. The list is not intended to show complete
interoperability or supportability information and will not be updated as new
hardware is released. If you have Sun hardware that is not explicitly listed, see the
Sun release notes for that product or contact Sun Services to determine support.
"Switches" on page 5
■
"Storage Platforms" on page 6
■
"Host Bus Adapters" on page 8
■
Switches
lists the switches, directors, and backbones compatible with the following
TABLE 1
configurations:
A Brocade 7800 Extension Switch running Fabric OS 6.3.0a.
■
A Brocade DCX Backbone or DCX-4S Backbone running Fabric OS 6.3.0a with a
■
Brocade FX8-24 Extension Blade installed.
Use the recommended software release versions to optimize the benefits of a SAN.
Supported Switches and Brocade Fabric OS Compatibility
TABLE 1
Supported Switch, Director, or Backbone
Brocade 200E Fibre Channel Switch
Brocade 300 Switch
Brocade 4100 Enterprise Fabric Switch
Brocade 4900 Switch
Brocade 5000 Switch
Brocade 5100 Switch
Brocade 5300 Switch
Brocade 7500 SAN Extension Switch
Brocade 7500E SAN Extension Switch
Brocade 7800 Extension Switch and FX8-24 Extension Blade Hardware Release Notes
General Compatibility
5.1.0
6.1.0e
6.1.0e
6.1.0e
6.1.0e
6.1.0e
6.1.0e
6.1.0e
6.1.0e
Recommended
6.2.1b
6.3.0a
6.3.0a
6.3.0a
6.3.0a
6.3.0a
6.3.0a
6.3.0a
6.3.0a
5