Sybase Adaptive Server Configuration Manual page 136

Adding auditing
Logical name
name Size
6. Audit_01'
7. Audit_02'
8. auditlog
Enabling auditing
120
Physical name
/secret1/sybase_
/secret1/sybase_
/secret1/.../auditlog.dat logsegment
7 When you are ready to execute the audit configuration, press Ctrl+A.
returns you to the Sybase Server Configuration screen.
auditinit
8 Press Ctrl+A again.
Execute the Sybase Server Configuration now?
9 Enter "y" (yes).
executes the tasks to install auditing. When the installation
auditinit
completes successfully, the following messages are displayed:
Running task: install auditing capabilities.
....................Done
Auditing capability installed.
Task succeeded: install auditing capabilities.
Configuration completed successfully.
Press <return> to continue.
After auditing is installed, no auditing occurs until a System Security Officer
enables auditing with
Administration Guide.
v Deleting a device entry
1 Select Delete a Device Entry from the Configure Auditing menu.
2 Enter the number of the device to delete.
3 Press return.
v Changing a device entry
1 Select Change a Device Entry from the Configure Auditing menu.
2 Enter the number of the device to change.
displays the Add/Change a New Device for Auditing menu with
auditinit
information on the device you selected:
ADD/CHANGE A NEW DEVICE FOR AUDITING
1. sybsecurity physical device name:
2. Logical name of the device: aud.log
Segment name
dr/install/aud1.dat' sysaudits_01
dr/install/aud2.dat' sysaudits_02
prompts with:
auditinit
. For more information, see the System
sp_configure
/secret1/sybase_dr/install/audlog
Table
syslogs
Adaptive Server Enterprise
5
5
2