JBL SB210 Application Manual

APPLICATION GUIDE

Subwoofer-Satellite Systems
Using Control SB-210 & SB-2 Subwoofers
From
Power
Amp
Using subwoofers and satellite loudspeakers with a pre-engineered passive crossover built into the
subwoofer can be a very effective way of achieving high-fidelity sound economically for applications
requiring greater bandwidth than is typically possible from full-range speakers alone.
When applied properly, small subwoofer-satellite systems – often referred to as "sub-sat" systems –
can provide high fidelity sound for a wide variety of applications, such as restaurants, retail stores,
hotels, music cafes, leisure venues, sports bars & lounges, fitness centers, themed applications, and
many more.
This guide provides recommended subwoofer-satellite configurations that work well together. In
addition, the Connection Information and System Design sections provide important information
for applying these subwoofer-satellite systems properly.
System #5 in Stereo
SPL (at 20 Feet):
94 dB Continuous (peaks of 104 dB)
Control 25AV Control 25AV
Left
(8 ohm setting) (8 ohm setting)
Left
Input
Terminals
Right
Control SB-210 with
MTC-210-SAT
Control 25AV
Right
(8 ohm setting)
Satellite
Outputs
MODULE SETTINGS:
Stereo / Mono Selector: Stereo
4-Ohm / 8-Ohm Selector: 4-Ohms
Crossover Input Module
System #5 in Stereo Mode Shown
Control 25AV
(8 ohm setting)