Verizon VZ4000 User Manual page 12

Installing and Setting up the Card Installing and Setting up the Card
2.7
Carefully screw the antenna onto
the threaded connector on the
Card. Turn the antenna until it is
vertical and pointing up.
2.8
Replace the computer's cover.
Now that the Card is installed, you
can reconnect the power cord,
and turn it back on.
2.9
After restarting, the wizard will
prompt you to install software
for the Card. Click the "Install
the software automatically
(Recommended)" option.
2.10
Hardware installation is now
complete. Click "Finish" to
close the wizard.
2.11
WNU installation is now complete.
Click "Finish" to close the wizard
and restart your computer.
Installation is now complete.
10