Oregon Scientific DS9300 User Manual page 35

NOTE
Do not use the "Reset Definition" mode to confirm new settings. This
mode should only be used to reset the menu to the factory default
settings.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
30
9300 Eng Manl(1-49p
In this mode, you can set the TV system in NTSC or PAL.
1. Press " " button to display the menu.
2. Use " " or " " button to select this mode (
3. Use " " or " " button to select "NTSC" or "PAL".
4. When you have finished setting, press the "
You can reset all of the menu and button operation settings to the
default settings.
1. Press the " " button to display the menu.
2. Use " " or " " button to select this mode (
3. Press button to reset.
4. When you have finished setting, press "
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
30
).
" button to exit.
).
" button to exit.
25/3/03, 3:15 AM