Headlight Range Adjustment; Headlight Flash - Vauxhall Insignia Owner's Manual

104 Lighting
Headlight range error position
When the system detects a failure in
the beam levelling, the system moves
to a programmable error positon to
avoid dazzling of oncoming traffic.
A warning is displayed in the Driver
Information Center. It may be
possible that the bulb, which is out of
order, will be automatically switched
off.
High beam
To switch from low to high beam,
push lever.
To switch to low beam, push lever
again or pull.

Headlight flash

To activate the headlight flash, pull
lever.

Headlight range adjustment

Manual headlight range
adjustment
To adapt headlight range to the
vehicle load to prevent dazzling: turn
knob to required position.
0 = front seats occupied
1 = all seats occupied
2 = all seats occupied and load
compartment laden
3 = driver's seat occupied and load
compartment laden.
Dynamic automatic headlight
levelling 3 102.
Headlights when driving
abroad
The asymmetrical headlight beam
extends visibility at the edge of the
road at the passenger side.
However, when driving in countries
where traffic drives on the opposite
side of the road, adjust the headlights
to prevent dazzling of oncoming
traffic.
Vehicles with halogen headlight
system
Have the headlights adjusted by
a workshop.